DOSING PUMPS
HPD PUMP 3350
The new HPLC / DOSING Compact Pump model 3350 for HPLC and High Precision Dosing covers the full area of modern LC and Dosing applications. The new designed electronic with the control of a high resolution stepper motor allows accurate flow rates at high pressure up to 60 MPa from 1pl up to 40.00 ml/min. With interchangeable pump heads the pump is able to cover a flow range from 1 pl to 40.0 ml/min at high and low backpressure. As a high precision compact pump it is the heart for any modular HPLC instrument or Micro- or Miniplant. The pump can be used in isocratic or gradient mode (for gradient a second pump is required).
Available Pump Heads in Stainless Steel 1.4401
-
Micro Pump head
Flow: rate1 pl - 1000 pl/min
Pressure range: 0 - 60 Mpa
P/N 2200 0100
-
Analytical Pump Head
Flow: rate 0.01 - 5.00 ml/min
Pressure range 0 - 60 Mpa
P/N 2200 0200
TECHNICAL DATA
-
Semi Prep Pump head
Flow: rate 0.1 - 20.00 ml/min
Pressure range 0 - 15 Mpa
P/N 2200 0300
-
Prep Pump head
Flow : rate 0.1 - 40.00 ml/min
Pressure range 0 5 Mpa
P/N 2200 0400
Pump Heads on request available in Titanium, PEEK and Hastelloy C (except Micro Pump Head)
HPD PUMP 2251
The new High Precision Dosing pump - model 2251 for ambient and / or high temperature metering of fluids.
The HPD Multitherm 200 covers a wide area of applications with it`s possibilities of variable flow ranges from micro to large flow (depending on the pump head), ambient and / or high temperature and wide pressure range. As a high precision dosing pump it is a unique dosing unit for the use in micro-process technology and mini-plants where high pressure and / or high temperature is needed.
Pump and Control Unit
TECHNICAL DATA
HPD Pump with Thermo Jacket (for all pump heads)
Temperature Control Unit: TCU 200
Operation Temperature: - 5 °C to + 200 °C
Pressure shut-off: for P min and P max
Temperature shut-off: if set temperature is exceeded
Compressibility: adjustable
Flow rate accuracy: better 3 %
Flow reproducibility: better 0.5 %
Residual Pressure Pulsation: better 3 %
Pump head identification: automatically
Purge Key: standard
External control: by contact closures or active input
by RS 232 or current loop all functions
Power requirements: 110/220 V +/- 10 % 50/60 Hz 50 VA
Dimensions: 381 x 255 x 130 mm (LxWxH)
Weight(without pumphead): 8.7 kg
P/N 2251 0000
Pump Heads
• HT0 Flow : 0,001 - 0,999 ml/min
pressure range: 0 - 60 MPa
P/N 2251 0100
• HT1 Flow : 0,010- 4,99 ml/min
pressure range: 0 - 50 MPa
P/N 2251 0200
• HT2 Flow : 0,100-19,99 ml/min
pressure range: 0 - 15 MPa
P/N 2251 0300
• HT3 Flow : 0,100-39,99 ml/min
pressure range: 0 - 5 MPa
P/N 2251 040
Options
Pump Heads (on request)
• Titanium
Flow 0,01-4,99 ml/min
pressure range: 0 - 50 MPa
• Hasteloy C
Flow 0,01-4,99 ml/min
pressure range: 0 - 50 MPa
Analogue-Interface
for external control via current or voltage
P/N 3.709.4000
Temperature Control Unit TCU 200
Including sensor cables.
TCU 200 fulfills temperature-dependent measurement, control, safety
and monitoring tasks.
Connections for 2 Pt100 sensors (working & safety)
Heater capacity: 2000W
Power requirements: 220 V +/- 10 % Attention: Not available in 110 V 50 Hz
Dimensions: 381 x 255 x 130 (L x W x H)
Weight: 2.5 kg
P/N 2251 2000
Thermo Jacket HT (High Temperature)
Ambient to 200° C(for all pump heads)
with integrated sensors
(Temperature Control Unit needed)
P/N 2251 1000
Thermo Jacket LT (Low Temperature)
Ambient to - 5° C(for all pump heads)
Only manufactured on request
(Cryo-Compact Circulator needed)
P/N 2251 1010